Introduction to Ti6Al4V TC4 Powder Material for the TC4 titanium alloy Also known as Ti-6Al-4V – titanium alloy It is a member of the (a+b), type titanium alloy. It is characterized by good mechanical properties, high stability, good toughness and plasticity, as well as high-temperature deformation performance. Hot pressure processing, quenching and ageing can make it more robust. Heat treatment can increase the strength by about 50% to 100% over annealing. It is strong at high temperatures and can operate at 400500 degrees for a long period.
TC4 has excellent low-temperature performance. It is still strong below -196 so it can be used to make low-temperature highpressure vessels like liquid hydrogen fuel tanks for missiles and rockets.

Physical properties of Ti6Al4V Powder, TC4 powder
Material for the TC4 titanium alloy It has lightweight, excellent mechanical and corrosion resistance properties as well as biocompatibility. It has low thermal conductivity, and is not magnetic.
Titanium-based metal It is a new type or metal whose properties are affected by other elements, such as carbon, nitrogen, hydrogen and oxygen. It generally has:
1, High strength . Titanium has a density of 4.51g per cubic centimeter. This is less than half the steel’s. The density of pure Titanium is comparable to that of regular steel. Some high-strength, titanium alloys have higher strength than those of many alloy structural metals. This means that titanium alloy’s specific strength (strength/density), is significantly higher than those of other metallic structural metals.
2, High thermal strength . The titanium alloy can maintain its required strength at medium temperature and can operate at 450500 for long periods.
3, Excellent resistance to corrosion . Titanium alloy can be used in humid conditions and seawater. Its corrosion resistance is superior to stainless steel pitting corrosion, acid corrosion, stress corrosion, especially strong alkali and chloride, as well as nitric acid and sulfuric acid.
4, good low-temperature performance . Titanium alloys are capable of maintaining their mechanical properties at ultra-low and low temperatures. TA7 is a high-performance titanium alloy with low gaps and good low-temperature performance. It can also maintain some plasticity below -253. Also, titanium alloy can be used as a low-temperature structural material.
5, Chemical activity high . Titanium exhibits high chemical activity. It can be used to react with oxygen and nitrogen as well as hydrogen, CO, CO2, CO2, water vapour, ammonia and other elements in the atmosphere. If the carbon content in titanium is higher than 0.2%, hard TiC forms in titanium. At high temperatures, a hard TiN is formed. Titanium can absorb oxygen if the carbon content exceeds 600. This is what creates a hardening layer. High temperatures can cause a hardening layer to form. This is due to an increase in hydrogen. Inhalation can make the surface hard brittle to 0.1 to0.15mm deep. The hard brittle can also reach 20%-30%. It has a strong chemical affinity and is easily adhered to the friction surfaces.
6, Thermal conductivity small elasticity . The titanium system’s thermal conductivity is 1/4 of nickel, 1/5th of iron, and 1/14th of aluminum. Different titanium alloys have a lower thermal conductivity at around 50%. The elastic modulus is half of that of steel. However, titanium has poor stiffness. It is not suitable to be used in thin-walled or slender parts.

Ti6Al4V Powder Properties
Other names	Ti6Al4V powder, TC4 powder
CAS No.	N/A
Formula compound	TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19, Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb)
Molecular Weight	N/A
Appearance	grey powder
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility of H2O	N/A
Exact Mass	N/A

Application of Ti6Al4V Powder and TC4 Powder
Ti6Al4V has many uses in high-performance engineering, including aerospace, automotive, medical device manufacturing, and other areas.
Aerospace: Components for jet engines
Manufacturing: Industrial turbines
Car: muffler
Medical: implants, artificial bones
The petrochemical industry: The TC4 Titanium rods are inert and extremely resistant to corrosion. The electrolyte for electrolytic Mn02 is a neutral solution of MnSO4, which requires that the electrode be resistant to sulfate corrosive. Telegraph machines made of graphite and lead alloy have a bad effect. The anode becomes semi-permanent after switching to titanium.
The rods of TC4 titanium alloy are resistant to almost all organic acids, organic media and except formic and oxalic acids. Additionally to methanol resistance, titanium is also resistant to the corrosion of organic alcohols, aldehydes and ketones.
Acetaldehyde, for example, is the main ingredient in acetic acids. The corrosion problems of stainless steel equipment are caused by acetic, acetaldehyde and chloride. Titanium material is used to fix this problem in acetic Acid production. For example, acetone can be made from propylene or can be produced using titanium production facilities. Japan constructed a plant capable of producing 30,000 tons per year of acetone. It also used 40 tons of Titanium.
TC4 Titanium rods are also resistant to wet H2S and wet SO4 gas.
In the oil refining business, equipment is frequently corroded with H2S, N8, sulfide or chloride. However, titanium equipment can resolve this problem. Titanium is used primarily in distillation towers and condensers. Titanium is ideal for ammonia and/or urea production because it resists corrosion.

Main supplier of Ti6Al4V Powder, TC4 powder
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and nanomaterials. They have over 12 years experience in producing super-high-quality chemicals, such as silicon powder.
High-quality products are what you want Ti6Al4V Powder, TC4 Powder Please feel free and contact us to send us an inquiry. (brad@ihpa.net)