If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: email@example.com
Introduction to Titanium Nitride Powder TiN
A golden cubic crystal is TiN. Its chemical formula is TiN. It has a molecular mass of 61.89. The melting point is 2950. The density of the material is 5.43g/cm3.
Titanium Nitride TiN Pulver’s Physicochemical Characteristics
Titanium Nitride is a synthetic ceramic material that is extremely hard. It is very similar to diamond. Titanium Nitride is chemically stable at ambient temperature, but can be oxidized at 800 degrees at atmospheric pressure by hot concentrated acid. It has the infrared reflection characteristics of an IR (infrared ray), and its reflection spectrum is comparable to that of gold (Au), making it pale yellow.
The relative friction coefficient of titanium Nitride is 0.4 to 0.9 depending on the substrate material. Its crystal structure is typical sodium chloride. The relative stoichiometry between elements is around 1:1. The thermodynamic stability factor X of the TiNx complex (0.6-1.2) is also found. This thin film of titanium dioxide cooled to close to absolute zero gives it 100,000 units of insulation. It is the world’s first superinsulating material.
|Titanium Nitride TiN Pulp Properties|
|Other Names||Tinite, TiNite, TiN powder, nitridotitanium|
|Appearance||Powder in golden brown|
|Solubility of H2O||Insoluble|
Is titanium nitride more powerful than steel?
It is stronger than many steels when titanium is mixed with other metals such as vanadium or aluminum. The best titanium alloys have a higher strength than lower and mid-grade stainless steels. But, stainless steel of the highest grade is stronger than titanium-alloy.
Titanium has the highest strength-toweight ratio of all known metals. While titanium has the same strength and weight as steel, it is 45% lighter.
Titanium Nitride TiN Pulver Applications
Powder metallurgy, fine ceramic raw material powder, conductive materials, and decorative materials can all be used. This material is used extensively in high-temperature resistance as well wear resistance, aerospace, and many other areas. This material is highly electrically conductive and can be used for electrodes and contact in molten salt electrolysis. It can also serve as an additive to hard-cutting instruments. Specifically,
Titanium Nitride coatings
These are often used on metal edges to protect the corrosion resistance and life expectancy of drills or milling cutters.
2. Its metallic luster makes it a popular choice for many purposes.
Car and clothing decoration
. The outer coating is usually nickel (Ni), chromium(Cr) and packaging pipes.
3. This coating can also be used for
Applications for military and aerospace
Protecting the suspension sliding surfaces of motorcycles and bicycles as well protecting them, and the damping shafts for remote-controlled toy cars.
4. This material is safe and compliant with FDA regulations, so it can be used frequently in.
Sharpening scalpel blades, orthopedic bone saws, and directly as implants (especially hip replacement implant) and other medical implants.
5. Titanium nitride films are available for use in
As a conductive barrier between active contacts and metal devices. Conductivity of the film can be formed when it is diffused in silicon metal.
6. This special blocking material also has the mechanical and chemical properties of a ceramic. This process is heavily used in current 45nm chips designs to improve transistor performance. This is the
Field can be achieved by combining titanium dioxide with a gate dielectric layer (eg. HfSiO can improve the dielectric constant, increase the gate length, drive current, and threshold voltage.
7. High biostability allows for extended use of the alloy.
, such as the prosthesis project under the retina and the micro-electro-mechanical system (bio-mems) in biomedicine, which enables intelligent implants or in vivo biosensors to withstand severe humoral corrosion.
Titanium Nitride TiN Pulver is Main Supplier
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and nanomaterials. They have over 12 years experience in producing super high-quality chemicals.
High-quality products are what you want
titanium nitride TiN powder
Please feel free and contact us to send an inquiry. (firstname.lastname@example.org)